 |
 |
 |
|
DV-25/35 - 25,000 & 35,000 BTU Mid-Size (Direct Vent) Wall Furnace
by Empire Heating Systems
Heat larger areas with Empire’s DV–25 and DV–35 Direct-Vent wall furnaces. Delivering room-filling warmth, each furnace is
stylishly crafted and fits against an outside wall.
A push of the button ignites the pilot with a “matchless” piezo
system. Add an optional internal blower for even greater air
circulation.
| Model | DV-210-SG | DV-215-SG | DV-25-SG | DV-35-SG | | Color Cabinet and Front Panel | Beige | Beige | Beige | Beige | | Btu Input | 10,000 | 15,000 | 25,000 | 35,000 |
| Width | 16 1/4” | 20 1/4” | 37” | 37” | | Depth | 9 3/8” | 9 3/8” | 11 1/2” | 11 1/2” | | Height | 21 3/8” | 24 7/8” | 27 3/4” | 27 3/4” | | Shipping Weight, lb. (One Carton) | 42 | 60 | 98 | 101 |
| Millivolt Wall Thermostat with Positive Off | Yes | Yes | Yes | Yes |
| Accessories (State on Order) |
| Blower Kit | DVB-1 | DVB-1 | DRB-1 | DRB-1 | | Output, Cu. Ft./Min. | 60 | 60 | 75 | 75 | | Vinyl Siding Kit | VSK-1 | VSK-1 | VSK-2 | VSK-2 | | Vinyl Siding Vent Kit | DV-822 | DV-822 | DV-822 | DV-822 | | Vent Tube Extension Kit (Fits wall from 13” to 19”) | * | * | * | * |
| Minimum Clearances to Combustibles from: |
| Top | 12” | 12” | 48” | 48” | | Each Side | 1” | 1” | 6” | 8” | | Bottom of Unit to Floor Covering | 0” | 0” | 4” | 4” |
| Type of Gas (State on Order) | Natural or LP | Natural or LP | Natural or LP | Natural or LP | | Iron Pipe Size (N.P.T.) | 1/2” | 1/2” | 1/2” | 1/2” | | Wall to Valve Inlet | 6 3/16” | 6 3/16” | 4” | 4” | | Right Side to Valve Inlet | 6 7/8” | 6 7/8” | N/A | N/A | | Center of Vent to Valve Inlet | N/A | N/A | Left 17 11/16” | Left 17 11/16” | | Valve Inlet to Floor Covering | 2 11/16” | 2 11/16” | N/A | N/A |
| Wall Depth Minimum | 4 1/2” | 4 1/2” | 4 1/2” | 4 1/2” | | Wall Depth Maximum | 13” | 13” | 13” | 13” | | Vent Opening in Wall | 6 1/2” Dia. | 6 1/2” Dia. | 6 1/2” Dia. | 6 1/2” Dia. | Center of Vent to Nearest Outside Corner of
Building or Obstruction | 16” | 16” | 24” | 24” | Center of Vent from any Opening through which
Flue Gases Could Enter a Building | 6” | 9” | 9” | 9” | | Bottom of Vent above Grade | 12” | 12” | 12” | 12” | | Edge of Vent to Nearest Projecting Surface | 6” | 6” | 6” | 6” | | Vent Projection from Outside Wall | 4” | 4” | 5” | 5” | | Center of Flue to Floor Covering | 15 7/8” | 19 3/8” | 19 3/4” | 19 3/4” |
Please refer to PDFs below for more details:Direct-Vent DV Series BrochureDV-(210,215)-7SG Manual
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Empire’s Di rect -Vent wall furnaces are ideal where existing flues or chimneys cannot be used.
Just one hole through an outside wall is all you need. If you must vent, you wi l l receive maximum
fuel economy from Direct-Vent heaters .
Slim, compact cabinet mounts on an outside wall.- DV-25 (25,000 Btu) and DV-35 (35,000 Btu)
-
Console cabinet mounts on an outside wall
-
Quiet operation
-
Matchless piezo ignition (heats without electricity)
-
Optional automatic blower
-
Ideal for family room
-
Made in USA
|
|
|
|
|
|
|