|
|
|
|
High-Efficient DV-20 20,000 BTU (Direct Vent) Wall Furnace
by Empire Heating Systems
The Empire High-Efficient DV-20E (20,000
Btu) furnaces’ attractive styling
gives any room a contemporary look. Space efficient
and easy to use, the unique design
makes them cool to the touch, meeting or
exceeding all American National Standards
Institute temperature tests.
The top-mounted control compartment allows you to simply flip the switch to “on†and turn to your desired temperature range. Empire offers the only high-efficient wall furnaces that can operate with optional thermostats – a traditional 24-Volt model and a wireless remote wall model – to provide set-it-and-forget-it heating control.
Model | DV-20E | DV-40E | DV-55E | Color: Cabinet and Front Panels | Beige | Beige | Beige | Btu Input | 20,000 | 40,000 | 55,000 | Btu Output | 16,300 | 32,600 | 44,825 |
Width | 37” | 37” | 37” | Depth | 15 3/4” | 15 3/4” | 15 3/4” | Height | 26” | 26” | 26” | Shipping Weight, lb.. (Two Cartons) | 128 | 135 | 146 |
Electronic Control | Yes | Yes | Yes | Blower, tangential type, one speed | 350 cfm | 350 cfm | 400 cfm |
Minimum Clearances to Combustibles From: |
Top | 10” | 10” | 10” | Left Side | 3” | 3” | 3” | Right Side* *Note: 10” Right Side Clearance Suggested for Serviceability to Right Side Panel Area | 3” | 3” | 3” | Bottom of Unit to Floor Covering | 0” | 0” | 0” |
Type of Gas (State on Order) | Natural or LP | Natural or LP | Natural or LP | Iron Pipe Size (N.P.T.) | 1/2” | 1/2” | 1/2” |
Wall Depth Minimum | 4 1/2” | 4 1/2” | 4 1/2” | Wall Depth Maximum See accessories for thicker walls | 13” | 13” | 13” | Vent Opening in Wall | 6 1/2” Dia. | 6 1/2” Dia. | 6 1/2” Dia. |
Venting Options | Maximum Length |
15’ with 2 Elbows | Yes | Yes | No | 10’ with 3 Elbows Note: Intake/exhaust extensions may be used in combination to a maximum of 15 ft. in length and two elbows. | Yes | Yes | No |
Accessories (State on Order) |
Intake/Exhaust Extension Kits: |
54” Kit with 2 Elbows | DVE-1 | DVE-1 | N/A | 54” Kit for Extended Vent Runs | DVE-2 | DVE-2 | N/A | Extended Vent Terminal* (for walls up to 32” thick) * Standard vent terminal for wall up to 10” thick is included with unit. | DVT-2 | DVT-2 | DVT-2 | Floor Pad | DVP-1 | DVP-1 | DVP-1 | 24-Volt Thermostat | T24V | T24V | T24V | Wireless Remote Wall Thermostat | TRW | TRW | TRW | Please refer to PDFs below for more details:High-Efficient Direct-Vent Wall Furnace BrochureDV-(20,40)E-5DV-55E-5
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
Empire’s High-Efficient Direct-Vent Wall Furnaces are available in
sizes to fit most home applications. The 20,000 Btu DV-20E is ideal for
maintaining a comfortable temperature in a basement or small family
room. Empire offers the only high-efficient systems to exceed 40,000
Btu. The 40,000 Btu DV-40E and 55,000 Btu DV-55E are perfect for heating
large family rooms, offices, apartments, or even entire homes – up to
2,000 square feet. Your dealer can help you select the
appropriate Empire heater to suit your home and your local climate.
-
State-of-the-Ar t Technology Ensures Exceptional Fuel Efficiency
-
Electronic Thermistor Thermostat Maintains Temperature Range
-
Standard Wall Thermostat Hook-up Accepts Any 24-Volt Wall Thermostat – Including Efficient
Programmable Thermostats (purchased separately) -
Optional automatic blower
-
Total Comfor t for a Fraction of the Cost of Electric Heat
- Sealed Combustion Chamber Maintains Indoor Air Quality
- Discreet Vent Termination minimizes disruptions to home’s exterior
- Filtered Air System
- Standard Unit Vents Through a Wall up to 10 inches Deep and up to 32 inches with the
DVT-2 accessory kit
-
Extended Horizontal and Ver tical Vent Run Accessories for 20,000 and 40,000 Btu Wall
Furnaces allow up 15 feet of venting - Built-in Blower Enhances Heat Distribution for Added Comfort
- Hot Surface Ignition Ensures Quiet Star ts and Saves Gas – Up To $20 Per Month
- Three Btu Sizes to Heat Any Space
- Peace of Mind Safety Features Built into Furnace
- Mobile Home Cer tified
|
|
|
|
|
|
|